can i paint my boat myself
You can get paint with nonskid material already mixed in, like interlux interdeck or pettit ezdecks, or you can buy your paint and nonskid compound separately and mix them yourself according to how aggressive you want your surfaces to be. done correctly, a paint job with nonskid compound will provide better footing than the original molded. As your boat begins to crack and fade after several years in the water, you have two choices -- hire a professional boat yard to paint it again or do it yourself. painting a boat takes a lot of time and effort, from preparing the hull to buying the paint, but anyone can do it with some simple equipment and a few open afternoons.. The masking tape should be placed so that half of it is on the newspaper, and the other half on the surface of the boat. since the paint will stop at the masking tape, apply it so that the edge is at the point where you want the paint to stop. mix up the 2-part epoxy paint as you go; it will take a little more time, but the resulting paint job. 
can i paint my boat myself Recoat following manufacturer recommendations regarding overcoating times, which can vary based on temperature. once the paint is dry, remove all masking tape and clean up the area. be sure to properly dispose of the old paint and any solvents used for clean up. if your boat is on jack stands or a cradle, painting under pads can be tricky.. I am currently about to paint the deck of my sailboat. i will use interlux brightside single-part polyurethane. i will lay down the first finish coat and spinkle non-skid onto it, and let that dry, and then add one or two coats over..
