boat paint layers
See how to prepare a boat for painting. removing old paint layers paint systems that are in a really poor condition are usually best removed in their entirety before the boat is repainted, so that there’s no risk of applying new paint to material that is not well adhered to the hull.. To seal up and strengthen my jon boat, and to hopefully gain some extra speed, i wanted to try the wetlander bottom coating. another product similar to this, is gatorglide. this wetlander kit size. The paint on your boat is an important line of defense against all these things. repainting your topsides is a big project, but at least it will give you a palette of colors. photo by doug logan. most recreational boats today are made of fiberglass with a shiny gelcoat outer surface. the second they leave the shelter of their builders’ yards. 
boat paint layers When applying an epoxy bottom coat you are looking to build up a layer that is 10 to 12 mils in thickness. (some epoxy bottom paint makers provide a gauge to enable you to see how this your paint layer is. if you have a gauge, use it.) in some cases this means applying two or three coats to get the required thickness.. Ez strip paint & varnish stripper is the only eco-friendly removal option for all types of paint and varnish on your boat! safe to use on your fiberglass gel coat with no damage. will not strip.
