varnish on a boat
Here's the basics to varnishing wood on a boat: complete prep work: remove old varnish by sanding, rinse down your boat and tape off your area. use a badger-hair brush when varnishing. apply a thin first coat, and keep a wet edge. keep your strokes long and light, brushing from dry back to the wet edge.. Wet varnish is a dust magnet; the slightest breeze will exacerbate the problem. try to apply a coat a day. the molecular chains link up between ‘uncured’ coats. if you leave it two weeks the varnish cures fully and a new chain has to start. cut the dust nibs with 320-grit and tack rag between coats. mirror finish. Boat varnish, is for many owners is the favorite way to show off the natural beauty of the wood and their boat. on wooden boats i believe it is best to stick to the traditional type of oil based boat varnish. or the natural sheen and ease of maintenance of an oiled finish.. 
varnish on a boat Before stripping a boat you will need to work out exactly how durable your paint needs to be once finished. there is no point in stripping a boat back to the original gel coat, priming and top coating if you only really need to key the surface and add a new topcoat.. Move along the boat in sections. once you finish one area, move to the next section immediately next to it. continue moving along the hull in a horizontal line. once you've reached the end of the hull, move to below your last section of wax and begin working in the opposite direction back down the hull..
